Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Model Years
  • Show Fewer Model Years

Forks

$1,549.99
Get Inverted. Back and better than ever the new Dorado Expert is ready to take on the gnarliest conditions mountain biking can provide. Whether you’re looking to cut seconds off the splits, lap the local park, or get sendy in the back hills of Utah the Dorado Expert has you covered. Featuring an all-new 37mm chassis, completely redesigned internals, and on-trail precision that only inverted forks can provide the new Dorado is your ticket to the best ride you’ve ever had. Key Features: - New 37mm chassis results in a massive increase in stiffness and ride quality. The new chassis is 20% stiffer compared to our former 36mm version - Inverted Design provides an incredibly smooth and consistent feel due to constant lubrication of the bushings and seals. The inverted design also provides a major increase in fore-aft stiffness compared to traditional forks while maintaining torsional compliance which provides more control to the rider over rough terrain. - The Dorado Air Spring system contains a unique balancing valve that equalizes the positive and negative air chambers during the air-fill process resulting in a consistent feel without any flat or dead spots. It also allows easy Travel Adjustability from 180 to 190 and 203mm without the need for any spare parts. - IVA (Incremental Volume Adjust) modifies the volume in the positive air chamber with self-contained spacers dictating the position of the IVA piston and your volume amount. - The new TPC+ Damper has increased oil volume and improved flow paths for improved bump compliance and increased consistency. TPC+ features two compression pistons, a hydraulic bottom out, and a spring-backed IFP for a smooth and predictable feel for every impact. Adjustments include; High-speed compression, Low-speed compression, and Low-speed rebound. - Fits both 29" and 27.5" wheels. Markings on the outer legs indicate the proper clamping point for ideal axle-to-crown measurements depending on wheel size. The fork legs can be used with both wheel sizes. - Two Crown Options are available with this fork. The 47 offset is designed to work with 27.5" wheels and intended axle to crown. The 57 offset crown is designed for 29" wheels and axle to crown. For those looking to run the lower offset crown with 29" wheels please reference our fit document to see if your headtube length is compatible. - TSR Bleed Screws allow you to release excess pressures built up in the outer legs of your fork while riding keeping your fork smooth and supple all day long. Product Details: - 37mm 6000 Series Aluminum stanchions with carbon fiber legs - Externally Adjustable: high-speed compression, low-speed compression, and rebound - Dorado air spring with IRT (Infinite Rate Tune) volume adjuster allows the rider to adjust mid-stroke support and bottom-out progressivity independent of initial spring rate - TPC+ Damper with HBO (Hydraulic Bottom Out) - TSR Bleeders - Includes removable bolt-on fender
$1,300.00
Sure, there are plenty of lightweight XC forks out there, but racing demands so much more. Nimble handling, gram-obsessed weight, buttery damping — combined they all make the difference between a good fork and a great fork. And with this in mind, the all-new RockShox SID World Cup Brain fork has been completely redesigned to meet the demands of XC racing, and hyperbole aside, we can confidently say that it sets the bar for race-worthy performance. The new SID has many new features, but the main attraction is its use of our proprietary Brain technology. Made famous on the rear of our Worlds-winning Epic, the Brain system knows the difference between rider and terrain inputs — staying firm in hard accelerations on smooth ground, and effectively soaking up imperfections when the trail decides to fight back. This translates to the highest efficiency possible when hammering up climbs, and smooth compression on the descents — all without ever having to flick a switch. The World Cup Brain edition of the SID is not just a slight upgrade over the RLC and XX models. Along with the integrated Brain technology, it utilizes a carbon fiber steerer and crown, which reduce weight by over 100 grams and increases the overall stiffness. Also adding to the stiffness of is the short-travel-specific design. Leaving the 120-millimeter segment to the trail category, RockShox’s engineers were able to focus on the 80- to 100-millimeter travel range, and therefore develop lighter and stiffer uppers and air shafts. This new design, along with SRAM's Torque Caps (they create an enhanced interface between the hub and fork dropout), Power Bulge technology that reinforces the lowers, and 110-millimeter Boost spacing, keeps torsional stiffness high, allowing you to point-and-shoot while descending. Last, but certainly not least, on the feature spec is the Solo Air spring that’s customizable with RockShox’s Bottomless Tokens. The Solo Air spring lets you adjust pressure with a single Schrader valve that controls the pressure in both the positive and negative air chambers, making adjustments to pressure simple and intuitive. To customize ramp-up preference, RockShox’s Bottomless Tokens can be added to create a suspension curve that’s custom to your preferences. - Tapered, full-carbon crown, and steertube, for optimized stiffness, steering precision, and light weight. - 110mm hub spacing, Power Bulge technology, and Torque Cap compatibility provides un-rivaled stiffness for an XC fork. - Top adjust Brain damper for on-the-fly Brain fade tuning. - RockShox Solo Air spring and Bottomless Tokens make setup easy and customizable. - Designed specifically around 100mm of travel for an optimal combination of weight savings and stiffness. - 29" wheel only - 51mm offset
$1,300.00
Sure, there are plenty of lightweight XC forks out there, but racing demands so much more. Nimble handling, gram-obsessed weight, buttery damping—combined, they all make the difference between a good fork and a great fork. And with this in mind, the all-new RockShox SID World Cup Brain fork has been completely redesigned to meet the demands of XC racing, and hyperbole aside, we can confidently say that it sets the bar for race-worthy performance. The all-new Brain damper uses position sensitive technology for better chassis balance and traction. It does this while retaining the ability to separate rider input from bump events on the trail—just some of the incredible stuff that Brain is known for. The new technology can now remain active during the initial 25mm of travel, and this creates a much more balanced riding position and supple front-end feel. In turn, this goes a long way in reducing rider fatigue. And although the fork feels more active initially, as soon as you standup to get on the gas, the forward shift in weight naturally compresses the fork into the platform. So yeah, you'll feel well supported and efficient during hard sprint efforts. Incredibly, Brain does all this while keeping you in control and riding smooth on rough terrain without any need for extra cables and lockout levers on the handlebars. The World Cup Brain edition of the SID is not just a slight upgrade over the RLC and XX models, either. Along with the integrated Brain technology, it utilizes a carbon fiber steerer and crown, which reduce weight by over 100 grams and increases the overall stiffness. Also adding to the stiffness of is the short-travel-specific design. Leaving the 120-millimeter segment to the trail category, RockShox’s engineers were able to focus on the 80- to 100-millimeter travel range, and therefore develop lighter and stiffer uppers and air shafts. This new design, along with SRAM's Torque Caps (they create an enhanced interface between the hub and fork dropout), Power Bulge technology that reinforces the lowers, and 110-millimeter Boost spacing, keeps torsional stiffness high, allowing you to point-and-shoot while descending. Last, but certainly not least, on the feature spec is the Solo Air spring that’s customizable with RockShox’s Bottomless Tokens. The Solo Air spring lets you adjust pressure with a single Schrader valve that controls the pressure in both the positive and negative air chambers, making adjustments to pressure simple and intuitive. To customize ramp-up preference, RockShox’s Bottomless Tokens can be added to create a suspension curve that’s custom to your preferences. - Tapered Full Carbon Steerer tube - Top-adjust Brain damper w/ Position Sensitive technology - 110mm spacing with Torque Cap compatibility - 100mm of travel
$1,299.99
Coil Fans Rejoice! Once again, the Dorado is available with a coil option. The new Dorado Comp features the same 37mm chassis as the Expert but with a more set-it-and-forget-it vibe. The coil spring provides a smooth consistent feel 100% of the time with 0% of any hassle. On the damping side of things, our ABS+ Damper offers a great adjustment range, terrific reliability, and easy serviceability. The Dorado Comp is built for riders who just want to ride and not sweat any of the small stuff. Key Features: - New 37mm chassis results in a massive increase in stiffness and ride quality. The new chassis is 20% stiffer compared to our former 36mm version. - Inverted Design provides an incredibly smooth and consistent feel due to constant lubrication of the bushings and seals. The inverted design also provides a major increase in fore-aft stiffness compared to traditional forks while maintaining torsional compliance which provides more control to the rider over rough terrain. - Coil Spring provides maximum bump sensitivity and simple service procedures. The standard spring rate provided in the fork is a medium rate of 35lb/in. For tuning, there are six spring rates available for this fork; 25lb/in, 30lb/in, 35lb/in, 40lb/in, 45lb/in, and 50lb/in. - ABS+ damper is known for its incredible reliability and easy tunability. Adjustments include a low-speed compression adjustment and a low-speed rebound adjustment. - Fits both 29" and 27.5" wheels. Markings on the outer legs indicate the proper clamping point for the ideal axle to crown measurements depending on wheel size. The fork legs can be used with both wheel sizes. - Two Crown Options are available with this fork. The 47 offset is designed to work with 27.5" wheels and intended axle to crown. The 57 offset crown is designed for 29" wheels and axle to crown. For those looking to run the lower offset crown with 29" wheels please reference our fit document to see if your headtube length is compatible. - TSR Bleed Screws allow you to release excess pressures built up in the outer legs of your fork while riding keeping your fork smooth and supple all day long. Product Details: - 37mm 6000 Series Aluminum stanchions with carbon fiber legs - Externally Adjustable: high-speed compression, low-speed compression, and rebound - Dorado air spring with IRT (Infinite Rate Tune) volume adjuster allows the rider to adjust mid-stroke support and bottom-out progressivity independent of initial spring rate - TPC+ Damper with HBO (Hydraulic Bottom Out) - TSR Bleeders - Includes removable bolt-on fender
$1,249.00
FOX 38 Factory Series Suspension Fork is the long-travel enduro specialist. It redefines what you think a long travel single crown fork is capable of, and sets a new benchmark for confidence, performance, and durability. - The floating axle offers a distinct performance advantage due to its unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs - Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality - The 38 Fork comes equipped with a quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release - Lower leg bypass channels alleviates air pressure by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping - Lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button - The 38's lower leg arch design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding
$1,249.00
FOX 38 Factory Series Suspension Fork is the long-travel enduro specialist. It redefines what you think a long travel single crown fork is capable of, and sets a new benchmark for confidence, performance, and durability. - The floating axle offers a distinct performance advantage due to its unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs - Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality - The 38 Fork comes equipped with a quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release - Lower leg bypass channels alleviates air pressure by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping - Lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button - The 38's lower leg arch design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding
$1,249.00
FOX 38 Factory Series Suspension Fork is the long-travel enduro specialist. It redefines what you think a long travel single crown fork is capable of, and sets a new benchmark for confidence, performance, and durability. - The floating axle offers a distinct performance advantage due to its unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs - Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality - The 38 Fork comes equipped with a quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release - Lower leg bypass channels alleviates air pressure by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping - Lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button - The 38's lower leg arch design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding - GRIP2 damper includes Fox's patented Variable Valve Control (VVC) technology which allows for external fine-tuning of suspension performance - FLOAT EVOL air spring technology increases negative air spring volume, optimizing small bump sensitivity - Direct mud guard mount - Genuine Kashima Coating on upper tubes - 27.5: 723mm peak tire diameter
$1,224.99
Coil Fans Rejoice! Once again, the Dorado is available with a coil option. The new Dorado Comp features the same 37mm chassis as the Expert but with a more set-it-and-forget-it vibe. The coil spring provides a smooth consistent feel 100% of the time with 0% of any hassle. On the damping side of things, our ABS+ Damper offers a great adjustment range, terrific reliability, and easy serviceability. The Dorado Comp is built for riders who just want to ride and not sweat any of the small stuff. Key Features: - New 37mm chassis results in a massive increase in stiffness and ride quality. The new chassis is 20% stiffer compared to our former 36mm version. - Inverted Design provides an incredibly smooth and consistent feel due to constant lubrication of the bushings and seals. The inverted design also provides a major increase in fore-aft stiffness compared to traditional forks while maintaining torsional compliance which provides more control to the rider over rough terrain. - Coil Spring provides maximum bump sensitivity and simple service procedures. The standard spring rate provided in the fork is a medium rate of 35lb/in. For tuning, there are six spring rates available for this fork; 25lb/in, 30lb/in, 35lb/in, 40lb/in, 45lb/in, and 50lb/in. - ABS+ damper is known for its incredible reliability and easy tunability. Adjustments include a low-speed compression adjustment and a low-speed rebound adjustment. - Fits both 29" and 27.5" wheels. Markings on the outer legs indicate the proper clamping point for the ideal axle-to-crown measurements depending on wheel size. The fork legs can be used with both wheel sizes. - Two Crown Options are available with this fork. The 47 offset is designed to work with 27.5" wheels and intended axle to crown. The 57 offset crown is designed for 29" wheels and axle to crown. For those looking to run the lower offset crown with 29" wheels please reference our fit document to see if your headtube length is compatible. - TSR Bleed Screws allow you to release excess pressures built up in the outer legs of your fork while riding keeping your fork smooth and supple all day long. Product Details: - 37mm 6000 Series Aluminum stanchions with aluminum legs - Externally adjustable low-speed compression spring preload and rebound - Includes removable bolt-on fender - 2.6 max tire width - 223mm max rotor diameter
$1,159.00
- 38mm chassis for increased stiffness and rider confidence - ButterCups block 20% of high frequency "trail chatter". Limiting these vibrations massively reduces hand and arm fatigue leaving you feeling fresh with more control. - Charger 3 features a completely new Internal Floating Piston (IFP) design with better fidelity, performance and truly independent adjustments without any "cross talk". - DebonAir+ is built to strike the perfect balance of what riders really want: butter-like small bump feel, increased air volume, and higher overall ride height. - Ultimate Bushing Package maximizes the fork's bushing overlap, reducing friction and creating the smoothest ride possible - Pressure Relief Valves eliminate unwanted air pressure build up in the lower leg caused by variations in altitude or temperature - Includes premium short fender
$1,150.00
The Ohlins RXF 36 Coil fork uses the same chassis of the RXF 36 fork, keeping the same stiffness, room for bigger tires, and proprietary TTX damping technology, but instead uses high quality coil springs that are easily swapped for various rider weights and it utilizes. This provides a ride with great feel throughout the travel—from small bumps to big hits. - Features a coil spring, with multiple spring rates in 0.9N/mm / 5lb/inch increments, allowing for a plush, linear suspension feel, tuned specific for the riders weight. - TTX (Twin Tube) damping enables separated oil flow, so the fork will always provide the perfect degree of pressure. This way, it stays smooth and high in the travel without compromising bump absorption, traction, or stability. - A tapered alloy steerer and two piece crown ensure high stiffness and tire control with less chassis flex and chassis hysteresis. 36mm stanchions with 51mm offset for party time on the trail. - 150 and 160mm travel options available. - 110 x 15mm spacing makes it compatible with most 29-inch setups.
$1,150.00
The Ohlins RXF 36 fork drafts off of the success of the 34, while bringing more stiffness and room for bigger tires. It operates off of a three-chamber air spring design (two positive and one negative), and it utilizes proprietary TTX damping technology. Combined, this allows both parallel and separated oil flow that controls the overall pressure levels. In a practical sense, this means that the fork is guaranteed to remain high in the travel, while also ensuring smoothness and predictable bump absorption throughout the entire ride. The shape of the spring force is also capable of being adjusted, which allows riders more fine-tuning options for preferences like increased sensitivity without the threat of bottoming out. Ohlins has increased the stanchions to 36mm and upped the spacing to 110mm while retaining the ultra-stiff alloy unicrown design. This means that it'll experience less flex for more tire control, while also trimming down on some weight. - Features a three-chamber air spring, with two positive chambers and one negative, allowing for an offset of spring pressure that perfectly mates stiffness with a plush, responsive ride quality. The shape of the spring curve can also be adjusted to increase sensitivity without bottoming out. - TTX (Twin Tube) damping enables separated oil flow, so the fork will always provide the perfect degree of pressure. This way, it stays smooth and high in the travel without compromising bump absorption, traction, or stability. - A tapered alloy steerer and high alloy unicrown ensure high stiffness and tire control with less chassis flex and chassis hysteresis. 36mm stanchions with 51mm offset for party time on the trail. - 15x110mm spacing makes it compatible with most 29-inch and 27.5+ setups.
$1,149.00
36 E-Optimized Factory forks are made specifically for the rigors of E-Bikes with a stouter chassis and longer durability due to adding material to strengthen critical areas. The design also uses tuning originally done for Enduro use, which fits the needs of the E-MTB and overall E-Bike uses. - Genuine Kashima Coating on upper tubes - FIT GRIP2 Damper and FLOAT air spring - E-Bike Chassis - Lower Leg Bleeders and Bypass Channels - Floating axles for perfect alignment - Updated Crown Design saves up to 20 grams, and offers significant structural improvements
$1,149.00
Own the mountain with the award-winning 36 Factory, featuring high- and low-speed rebound adjuster, improved compression damping and reduced friction for unmatched performance and adjustability. - Genuine Kashima Coating on upper tubes - FIT damper and FLOAT EVOL air spring - Low friction seals for improved performance - Lower Leg Bleeders and Bypass Channels - Floating axles for perfect alignment - Updated Crown Design saves up to 20 grams, and offers significant structural improvements
$1,139.00
Own the mountain with the award-winning 36 Factory, featuring high- and low-speed rebound adjuster, improved compression damping and reduced friction for unmatched performance and adjustability. - Genuine Kashima Coating on upper tubes - FIT damper and FLOAT EVOL air spring - Low friction seals for improved performance - Lower Leg Bleeders and Bypass Channels - Floating axles for perfect alignment
$1,107.00
- 35mm chassis with a focused all-mountain mindset - satisfyingly stiff, efficient and designed to eliminate as much weight as possible. - ButterCups block 20% of high frequency "trail chatter". Limiting these vibrations massively reduces hand and arm fatigue leaving you feeling fresh with more control. - Charger 3 features a new Internal Floating Piston (IFP) design with better fidelity, performance and truly independent adjustments without any "cross talk". - DebonAir+ is built to balance butter-like small bump feel, increased air volume, and higher overall ride height - Ultimate Bushing Package maximizes the fork's bushing overlap, reducing friction and creating the smoothest ride possible - Pressure Relief Valves eliminate unwanted air pressure build up in the lower leg caused by variations in altitude or temperature. - RockShox premium short fender included
$1,100.00
The Öhlins RXF 36 fork drafts off of the success of the 34, while bringing more stiffness and room for bigger tires. It operates off of a three-chamber air spring design (two positive and one negative), and it utilizes proprietary TTX damping technology. Combined, this allows both parallel and separated oil flow that controls the overall pressure levels. In a practical sense, this means that the fork is guaranteed to remain high in the travel, while also ensuring smoothness and predictable bump absorption throughout the entire ride. The shape of the spring force is also capable of being adjusted, which allows riders more fine-tuning options for preferences like increased sensitivity without the threat of bottoming out. Öhlins has increased the stanchions to 36mm and upped the spacing to 110mm with an ultra-stiff two-piece alloy crown design. This means that it'll experience less flex for more tire control, while also trimming down on some weight. - Features a three-chamber air spring, with two positive chambers and one negative, allowing for an offset of spring pressure that perfectly mates stiffness with a plush, responsive ride quality. The shape of the spring curve can also be adjusted to increase sensitivity without bottoming out. - TTX (Twin Tube) damping enables separated oil flow, so the fork will always provide the perfect degree of pressure. This way, it stays smooth and high in the travel without compromising bump absorption, traction, or stability. - A tapered alloy steerer and high alloy two-piece crown ensure high stiffness and tire control with less chassis flex and chassis hysteresis. 36mm stanchions with 46mm offset for party time on the trail. - 150 and 170mm travel options available. - 15x110mm spacing.
$1,099.99
In 2019 Cane Creek launched their WS130 down country low travel fork, 4 years later they are paying homage to the WS130 by introducing an extremely limited run of their low travel modular fork, the Works Series Helm. The Works Series Helm is a robust, modular fork that equips riders looking for a fork in the 100-130mm travel range with the confidence to ride through tech or push up climbs. The Works Series Helm is available in 4 travel options: 100mm, 110mm, 120mm and 130mm options. Like Cane Creek’s Helm MKII, the Works Series can easily be travel adjusted in 10mm increments with just a few tools at home. Built with a stiffer chassis, the Works Series gives a smoother, more controlled ride. All of Cane Creek’s suspension products are hand-built in Western North Carolina and rigorously tested in the Pisgah National Forest.
$1,099.99
Featuring 37mm stanchions and our Reverse Arch design the Mezzer Pro is the stiffest Enduro fork on the market… it’s also the lightest. How did we manage to accomplish this you ask? Well, it’s not hollow if that’s what you're wondering. In fact, this fork is loaded with technologies such as a fully sealed MC² damper, our proven Dorado air spring, and the life-changing IRT volume adjuster. What does all this mean? It means you no longer need to pick two, you can have the lightest, stiffest, and incredibly adjustable fork all at once. Key Features: - 37mm stanchions, Reverse Arch design, and Hexlock SL2 axle combined together result in ultimate stiffness - Originally developed for the Dorado down-hill fork, the Dorado Air Spring offers ultimate sensitivity featuring a self-equalizing negative air spring. When inflating the fork both the positive and negative air chambers are filled simultaneously equalizing the pressures to create an incredibly supple feel - IRT (Infinite Rate Tune) volume adjuster allows control over the mid-stroke support and bottom-out progressivity independent from the initial spring rate to independently tune small bump sensitivity and big-hit performance - Sealed MC² damper provides a range of blow-off thresholds to satisfy any requirement with separate high-speed and low-speed adjustments. Utilizing a bladder, our new sealed cartridge maintains damping consistency in the most severe riding conditions. - 140mm to 180mm internally adjustable travel in 10mm increments (travel spacers included) - 27.5” and 29” wheels - Integrated flexible fender can be installed/removed by three small screws threaded into the arch of the fork Product Details: - MC² bladder cartridge damper offers adjustable high-speed compression damping, low-speed compression damping - Expansion bladder with patent-pending blow-off valve compensates for oil displacement, with lower friction than a traditional internal floating piston - 37mm chassis with torsional stiffness up to 30% higher than similar forks from competitors - Dorado Air spring features an enlarged negative air chamber for linear initial stroke and reduced IRT volume for progressive end stroke - Internally adjustable travel from 180mm to 140mm
$1,054.00
- 35mm chassis at home on the trail - stiff, playful and light, really light - ButterCups block 20% of high frequency “trail chatter”. Limiting these vibrations massively reduces hand and arm fatigue leaving you feeling fresh with more control. - Charger 3 features a new Internal Floating Piston (IFP) design with better fidelity, performance and truly independent adjustments without any "cross talk". - DebonAir+ is built to balance butter-like small bump feel, increased air volume, and higher overall ride height - Ultimate Bushing Package maximizes the fork’s bushing overlap, reducing friction and creating the smoothest ride possible - Pressure Relief Valves eliminate unwanted air pressure build up in the lower leg caused by variations in altitude or temperature. - RockShox premium short fender included
$1,049.99
Featuring 37mm stanchions and our Reverse Arch design the Mezzer Pro is the stiffest Enduro fork on the market… it’s also the lightest. How did we manage to accomplish this you ask? Well, it’s not hollow if that’s what you're wondering. In fact, this fork is loaded with technologies such as a fully sealed MC² damper, our proven Dorado air spring, and the life-changing IRT volume adjuster. What does all this mean? It means you no longer need to pick two, you can have the lightest, stiffest, and incredibly adjustable fork all at once. Key Features: - 37mm stanchions, Reverse Arch design, and Hexlock SL2 axle combined together result in ultimate stiffness - Originally developed for the Dorado down-hill fork, the Dorado Air Spring offers ultimate sensitivity featuring a self-equalizing negative air spring. When inflating the fork both the positive and negative air chambers are filled simultaneously equalizing the pressures to create an incredibly supple feel - IRT (Infinite Rate Tune) volume adjuster allows control over the mid-stroke support and bottom-out progressivity independent from the initial spring rate to independently tune small bump sensitivity and big-hit performance - Sealed MC² damper provides a range of blow-off thresholds to satisfy any requirement with separate high-speed and low-speed adjustments. Utilizing a bladder, our new sealed cartridge maintains damping consistency in the most severe riding conditions. •140mm to 180mm internally adjustable travel in 10mm increments (travel spacers included) •27.5” and 29” wheels •Integrated flexible fender can be installed/removed by three small screws threaded into the arch of the fork Product Details: - 37mm stanchions Reverse-Arch design and Hexlock SL2 axle for the ultimate stiffness - Fully adjustable IRT air spring to fine-tune ride feel - Sealed MC2 damper provides a range of blow-off thresholds to satisfy any requirement with separate high-speed and low-speed adjustments - 140mm to 180mm internally adjustable travel in 10mm increments (travel spacers included) - Integrated flexible fender can be installed/removed by three small screws threaded into the arch of the fork
$999.00
Cross-country purists… we see you. You’re why SID SL Ultimate is the lightest XC fork on the trail. But weight is meaningless without world-class performance and durability. SID SL features a new Charger Race Day 2 Damper with three-position (3P) compression damping—rigid Lock, plush Open, and efficient Pedal positions, on demand for every inch of the race course. FEATURES - Our lightest 32mm chassis ever. World Cup-proven performance, built for your next podium result. - Longer-travel 110mm option, in case you’re feeling extra. - Charger Race Day 2 damper is the lightest damper on the market. This 3P damper features three compression positions: Open, Pedal, or a rock-solid Lock. - Machined crown for lighter weight and greater strength. - Covetable “Blue Crush” signature colorway and Ultimate High Gloss Black, featuring the new lustrous Pearl White graphics package. - Maxima Plush Dynamic Suspension Lube reduces friction, lasts longer, and enhances suspension performance ride after ride. -DebonAir air spring is tuned specifically to meet the demands of XC and maintains a higher ride height for increased confidence and control.
$989.00
The 38 Performance Series forks retain the same black anodized 7000 series aluminum upper tubes as Performance Elite, except paired with a GRIP damper. Push-button bleeders are not included but can be purchased separately. - Black anodized upper tubes - FIT GRIP damper and FLOAT EVOL air spring - Three on-the-fly compression damping positions: Open, Medium, Firm - Performance Series black-on-black graphics package
$968.00
Designed not only for the race down but the also ride up. Holding onto every critical line, Lyrik Ultimate features an updated DebonAir air spring paired with our Charger 2.1 damper for unmatched trail control and precision. Ultra-low friction SKF wiper seals and Maxima Plush damping fluid all work overtime to reduce friction, silence noise, and provide unmatched fork performance sunup to sundown. - Updated highly tunable DebonAir air spring offers a buttery smooth feel off the top and maintains a higher ride height for increased confidence in steep terrain - Designed to reduce hand fatigue and fight unwanted friction, the Charger 2.1 damper increases confidence and control over every trail - Charger 2.1 RC2 damper featuring independent high and low-speed compression adjust - Ultra-low friction SKF wiper seals provide long-lasting fork performance and improve overall suspension feel - Maxima Plush damping fluid reduces friction and silences damper noise - Ultimate foil graphics package
$949.00
Competition drives innovation, and as cross-country athletes and course designers push the boundaries of lightweight components, 32 Step-Cast Factory rises to meet the demand. A redesigned crown for 2020 increases stiffness to the same level as the trail-proven 34. The distinct shape of the Step-Cast chassis uses a narrow stance to save weight and the step design makes room for the spokes and brake rotor. - Genuine Kashima Coating on upper tubes - 32 mm upper tubes and ample bushing overlap for a quality ride - Hollowed out lower legs provide even more weight savings - FIT4 damper and FLOAT air spring
$930.00
The RockShox SID SL Ultimate BRAIN incorporates a race-tuned Brain Inertia Valve with Position-Sensitive technology into the all-new RockShox SID SL chassis. New Position-Sensitive Brain technology provides more platform support while maintaining small bump compliance and chassis balance, making this the most efficient BRAIN yet. Position-Sensitive technology allows riders to sag into the fork 15mm for a balanced ride, providing supple small bump compliance and a firm pedaling platform without the need for a remote lockout or levers to flip. All new SID SL Ultimate Chassis features a machined alloy crown to shed even more weight while increasing stiffness. - New Position-Sensitive tune provides an increase in platform support. - New SID SL Ultimate chassis features increased stiffness, lighter weight, and reduced friction. - Torque cap compatible for stiff dropout/hub interface. - 100mm travel, 44mm offset, 110mmx15mm hub spacing.
$914.00
This is the Pike DJ. It's a cousin to the award-winning Pike, which makes it look a lot like a trail fork — until you ride it. Pike DJ is built on a stout 35mm chassis and includes a custom-tuned Charger damper and specific Solo Air system designed for more bottom-out progression than you'll ever need because your trails eventually require some landings. - New graphics package for a fresh, premium look - Proven Charger damper with specific Dirt Jumping/Slopestyle tune - Specific Solo Air top cap for extra bottom-out progression - Accepts Bottomless Tokens to easily custom-tune the air spring performance to best match your own riding style and suspension preference
$896.00
- Performance-packed, featuring an updated 38mm chassis, now compatible with new Pressure Relief Valves. - 38mm chassis for increased stiffness and rider confidence - Charger RC damper featuring Low Speed Compression adjust - DebonAir+ is built to strike the perfect balance of what riders really want: butter-like small bump feel, increased air volume to add support throughout the travel and higher overall ride height for more confidence when things get steep. - Compatible with new Pressure Relief Valves - Maxima Plush Dynamic Suspension Lube reduces friction and enhances fork performance ride after ride - Bolt-in torque cap adapters now included for the use with standard hub end caps
$799.99 - $849.99
Featuring 37mm stanchions, home mechanic-approved travel adjustability from 180mm to 140mm, and our easy-to-use VTT-6P damper, the Mezzer Expert is the smart choice for anyone looking to dive into the Enduro Fork market. Should you later decide you would like more adjustability from your fork, factory upgrades such as IRT and MC2 are available and can be easily installed in your own garage. At 2030g this fork is the second lightest option available within the Enduro fork market, second only to the Mezzer Pro of course. Key Features: - 37mm stanchions, Reverse Arch design, and Hexlock SL2 axle combined together result in ultimate stiffness - Expert Air offers ultimate sensitivity featuring a self-equalizing negative air spring. - IVA (Incremental Volume Adjuster) allows you to modify your positive air chamber volume by rearranging self-contained spacers. You'll never lose a volume spacer again. - VTT-6P damper provides 6 easy clicks to dial in your damping for all types of terrain. - Integrated fender can be installed/removed by three small screws threaded into the arch of the fork. - TSR (Trail Side Relief) valves on the back of the lower legs allow you to bleed off built-up air within the lower legs to keep things butter smooth between service intervals Product Details: - VTT-6P damper provides 6 clicks to tune damping for all types of terrain - 37mm stanchions, Reverse-Arch design, and Hexlock SL2 axle for the ultimate stiffness - IVA, Air Volume Adjustability by rearranging self-contained spacers - TSR, Trail Side Relief valves on the back of the lower legs allow air to be bled off if it builds up within the lower legs to keep things butter smooth between service intervals - Internally adjustable travel from 180mm to 140mm in 10mm increments with included spacers - 2.6" maximum tire width
$849.00
The 34 Step-Cast Performance is the choice for riders who want an all-round fork that performs in a vast range of applications: lightweight for climbs and highly capable for demanding terrain with enough travel to instill confidence when the trail gets rough. Weight savings are attributed to external lower casting steps, hollow lower section, and shortened shaft lengths. - Step-Cast chassis - Black anodized upper tubes - FIT GRIP damper and FLOAT EVOL air spring - Dedicated air spring and damper tune are specific for this travel range, with a lighter tune at mid and higher velocities - Performance Series black-on-black graphics package
$843.00
- 35mm chassis with a focused all-mountain mindset - satisfyingly stiff, efficient and designed to eliminate as much weight as possible. - Charger RC damper featuring Low Speed Compression adjust - DebonAir+ is built to strike the perfect balance of what riders really want: butter-like small bump feel, increased air volume to add support throughout the travel and higher overall ride height for more confidence when things get steep. - RockShox premium short fender included - Maxima Plush damping fluid reduces friction and silences damper noise
Page 1 of 5 Next page